ONX Sizing Engine
ONX Motion Sizing Wizard
Select your mechanism, enter load and motion profiles, and define the reduction chain. Let ONX Control handle the physics solver.
Select Mechanism Type
LeadScrewLoad Parameters
kg
η
µ
N
deg
Nm
kgcm²
-
-
Motion Profile
mm
s
s
s
s
Output Velocity
0
Motor Torque
0
Reduction Chain
1
Stage 1
No reduction is used in this stage. Motor is directly coupled to the load.
2
Stage 2
No reduction is used in this stage. Motor is directly coupled to the load.
3
Stage 3
No reduction is used in this stage. Motor is directly coupled to the load.
-
-
Safety Margins & Limits
Safety Margins (%)
%
%
%
Inertia Mismatch Limit
Define the maximum acceptable ratio of load inertia reflected to the motor relative to the motor's rotor inertia.
: 1
Engineering Note: A 1:10 ratio is a safe limit for most applications. However, for high-response dynamic systems, a ratio below 1:5 is preferred.
Validation Errors
Results Waiting
Req. Continuous Torque
0.00
Nm
Req. Peak Torque
0.00
Nm
Max Speed
0 rpm
Reflected Inertia
0 kgcm²
Total Ratio
1.00
Total Efficiency
100%
Peak Power
0 W
Average Power
0 W
Inertia Ratio
-
Calculated torque, speed, inertia, and reduction data will be automatically transferred to the quote form.
Engineering Warnings
- -
ONX Recommended Motors
Auto MatchSolver Summary
ApplicationLeadScrew
ProfileCustomTrapezoid
Move Time1.00 s
Travel500 mm
