Control Techniques
Estun Automation
CODESYS
Crevis
Nexcom / Nexcobot
Leroy-Somer
Servo Systems
AC Drive + Motor
DC Drives
Smart PLC
Panel PC / IPC
Remote I/OCase Studies and Technical Guides
Machines ONX Control has put into production, with their architecture and measured results, and engineering guides with formulas and worked examples.
Case studies
Technical case files from machines ONX Control put into production: the problem, control architecture, axis layout, software and sourced results.
Case study · Food packaging
17-Axis Servo Cake Packaging Line: Smart Belt, Lug Chain and Flow Wrapper
A 17-axis servo line that feeds randomly spaced cakes in phase into a flow wrapper through a smart belt and a lug chain: up to 700 pcs/min, ±0.5 mm registration accuracy, 1 empty pack in 1,000.
Read the case
Case study · Plate cutting
Rotary Shear for 15 mm Plate: One Knife on 2 × 250 kW Motors, CODESYS RTE and EtherCAT
A rotary shear cutting plate up to 15 mm thick, with two 250 kW induction motors turning one knife together: 10–80 m/min, 200 mm – 10 m cut length, ±0.5 mm tolerance.
Read the case
Technical guides
Step-by-step engineering guides on servo sizing, motion control and CODESYS: formulas, worked examples, assumptions and what to watch for in the field.
Technical guide · Servo sizing
Flying Shear Servo Motor Sizing: 6 m Cuts on a 120 m/min Line, Step by Step
Cycle, stroke, torque, speed and motor selection for a flying shear cutting 6 m at 120 m/min with a 600 kg carriage and a 1 s cut, with formulas and tables.
Read the guide
Technical guide · CODESYS
CODESYS Runtime Selection: Control RTE, Linux SL and Virtual Control
Choosing between Control RTE SL, Control for Linux SL, Virtual Control SL and Control Win SL by real time, hardware, EtherCAT and licensing, with ONX field measurements.
Read the guide