General Warranty Terms
Warranty periods and coverage for the industrial automation products you buy from ONX Control, and how to send us a faulty product.
Last updated: 15 November 2026
General products
2 years
Applies to all products from the invoice date, unless a different period is stated in the quotation, invoice or product documentation.
Control Techniques
5 years
Control Techniques drives and option modules purchased through ONX Control carry a 5-year warranty from the invoice date.
Control Techniques productsScope and period
The warranty covers defects in materials and workmanship that occur while the product is used in line with its manual and rated values. The warranty period starts on the date of the invoice issued by ONX Control.
The warranty period is 2 years for general products and 5 years for Control Techniques drives and option modules. Where a quotation, invoice or manufacturer document states a different period for a specific product, that period applies.
These terms are intended for business customers purchasing for commercial purposes. For purchases made as a consumer, the provisions of Turkish Consumer Protection Law No. 6502 remain reserved.
What the warranty does not cover
Faults and damage resulting from the following are not covered by the warranty:
- Installation, wiring, earthing, cooling or panel layout that does not follow the product manual and applicable standards.
- Operation outside the rated values; electrical overloads such as overcurrent, overvoltage, mains disturbances or lightning strikes.
- Opening, repair or modification of the product by unauthorised persons; removal or defacing of the serial number label.
- Environmental effects such as moisture, liquids, dust, conductive particles, corrosive atmospheres, excessive temperature, fire, flooding and natural disasters.
- Impact, dropping, and damage during transport or storage under the customer's responsibility.
- Faults caused by incorrect parameter settings, incompatible software or firmware, third-party equipment or system design.
- Normal wear of wear parts such as fans, batteries, fuses, relay contacts, bearings, seals and brushes.
Fault reporting and RMA process
Please contact us before sending a faulty product. Products sent without approval and an RMA number may not be processed.
- 1 Email teknik@onxcontrol.com with the invoice or delivery note number, product model, serial number, a description of the fault, any error or trip code, application details and photos.
- 2 Our technical team reviews the report. If the issue can be solved with remote support or a parameter correction, it is solved without shipping the product.
- 3 If the product needs to be inspected, you receive an RMA number and a shipping address.
- 4 The product is inspected at ONX Control or, where necessary, at the manufacturer's service centre. You are informed in writing of the result and whether the fault is covered.
- 5 A covered product is repaired or replaced and shipped back to you. If the fault is not covered, you receive a quotation for a paid repair before any work is done.
Shipping the product
Send the faulty product in its original packaging or other packaging that protects it, with the RMA number written on the parcel. Circuit boards and drives must be packed in antistatic packaging. Transport damage caused by inadequate packaging is not covered.
The cost of shipping the product to ONX Control is borne by the customer. ONX Control covers the cost of returning a product repaired or replaced under warranty to your address in Turkey. If the product is found not to be covered, shipping costs in both directions are borne by the customer.
Transport damage and missing items visible on delivery must be noted on the delivery document and reported in writing within 2 days of delivery at the latest.
Repair or replacement
For a covered fault, ONX Control and the manufacturer decide, based on the inspection result, whether the product is repaired or replaced with the same or an equivalent model. Where neither repair nor replacement is possible, the invoiced price of the product is refunded.
A repaired or replaced product remains under warranty for the remainder of the original product's warranty period. Replaced faulty products and parts become the property of ONX Control or the manufacturer.
An inspection and shipping fee may be charged for products in which no fault is found or whose fault is not covered by the warranty. The warranty does not include on-site service; we can quote separately for on-site support.
Limitation of liability
Our liability under the warranty is limited to repairing or replacing the faulty product or, where this is not possible, refunding its invoiced price.
ONX Control is not liable for indirect losses such as lost production, downtime, lost profit, removal and reinstallation labour, or damage to other equipment. This limitation does not apply in cases of intent or gross negligence.
Please back up parameters, programs and configuration before sending a product. ONX Control cannot be held responsible for data lost during repair or replacement.
Contact
Contact our technical team for fault reports and RMA requests, and our sales team for questions about warranty coverage and commercial matters.
Oniks Kontrol Sistemleri ve Mühendislik A.Ş. · Girne Mah. Irmaklar Sok. Küçükyalı İş Merkezi A Blok No:3 Maltepe/Istanbul, Turkey
CODESYS
Nexcom / Nexcobot
Leroy-Somer
Servo Systems
AC Drive + Motor
DC Drives
Smart PLC
Panel PC / IPC
Remote I/O