Parallel Resistor Calculator
Calculate the equivalent resistance of resistors in parallel; enter the source voltage to see branch currents, power and the recommended power rating. Use the standard value finder to build a value you do not have from E12/E24 resistors.
Circuit Configuration
Dynamic InputBase Equation
Parallel CircuitIn parallel connected resistors, the source voltage is the same across all branches. As the resistance decreases, the current passing through that branch increases, and the total equivalent resistance decreases.
Resistor Branches
Live UpdateDetailed Results
Live AnalysisBranch Currents
If Voltage EnteredIf the source voltage is entered, the current passing through each resistor branch is shown separately. In a parallel circuit, the voltage across each branch is identical.
Standard value finder
E12 · E24Need a value you don't have? Enter the target; we find the closest single standard resistor and the best pairs in parallel or series (ratio of the two resistors at most 10).
The error is against the nominal values. A pair's tolerance is close to that of its resistors, so for precise values use 1 % (E96) resistors.
Current in each branch and its share of the total. In parallel, the smallest resistor draws the largest current.
Engineering Expert Window
Current divides in a parallel circuit: The source voltage is the same in all branches. More current flows through the branch with lower resistance value. Therefore, the power dissipation may be different in each resistor.
Equivalent resistance decreases: Every time a new resistor is added to the parallel branch, total conductance increases, hence the equivalent resistance decreases. The result is always smaller than the smallest resistor in the circuit.
ONX Tech Summary
Live circuit summary
ONX Comment
How to calculate resistors in parallel
Resistors in parallel share the same two nodes, so they all see the same voltage and the current divides between the branches. The equivalent resistance comes from adding the reciprocals, not the resistances, and is always smaller than the smallest resistor.
Series vs parallel
| Series | Parallel | |
|---|---|---|
| Equivalent resistance | R = R₁ + R₂ + … | 1/R = 1/R₁ + 1/R₂ + … |
| Result | larger than the largest | smaller than the smallest |
| Voltage | divides across resistors | same on every branch |
| Current | same through every resistor | divides between branches |
| If one resistor opens | the circuit opens | the other branches keep working |
| 1 kΩ, 2.2 kΩ, 4.7 kΩ | 7.9 kΩ | 599.8 Ω |
Worked parallel resistor examples
Entering the same values in the tool gives the same results.
1/R = 1/1000 + 1/2200 + 1/4700
R ≈ 599.8 Ω · I = 12 / 599.8 ≈ 20.0 mA
Branch currents 12 / 5.45 / 2.55 mA; dissipation 144 / 65.5 / 30.6 mW. Recommended ratings 0.5 / 0.25 / 0.125 W.
R = 470 · 1000 / (470 + 1000)
R ≈ 319.7 Ω
The result is below the smaller resistor (470 Ω), a quick sanity check.
4 × 1 kΩ → R = 1000 / 4 = 250 Ω
Current splits equally into four branches; four 0.25 W resistors together handle up to 1 W. A practical fix when no high-power resistor is at hand.
E12: 3.3 kΩ || 10 kΩ = 2.481 kΩ (−0.75 %)
E12: 1 kΩ + 1.5 kΩ = 2.5 kΩ
E24: 3 kΩ || 15 kΩ = 2.5 kΩ
The closest single E12 resistor is 2.7 kΩ (+8 %). The standard value finder above gives the same result. Go to the finder
Frequently asked questions
How do you calculate resistors in parallel?
Add the reciprocals of the resistances and take the reciprocal of the sum: 1/R = 1/R₁ + 1/R₂ + … + 1/Rₙ. For example, 1 kΩ, 2.2 kΩ and 4.7 kΩ in parallel give about 599.8 Ω.
What is the shortcut for two resistors in parallel?
For two resistors use the product over the sum: R = R₁·R₂ / (R₁ + R₂). For example, 470 Ω and 1 kΩ in parallel give 470·1000 / 1470 ≈ 319.7 Ω.
Why is the equivalent resistance smaller than the smallest resistor?
Each parallel branch opens another path for current and adds conductance. The equivalent resistance is therefore always smaller than the smallest resistor; if your result is larger, there is a mistake.
What happens with equal resistors in parallel?
n equal resistors R in parallel give R/n and share the current equally. Four 1 kΩ resistors give 250 Ω, and four 0.25 W resistors together can handle up to 1 W.
How does current divide in a parallel circuit?
Every branch sees the same voltage; each branch current is Iₖ = V / Rₖ. The smallest resistor draws the largest current, and the total current is the sum of the branch currents.
How can I get a non-standard resistance value?
Combine two standard resistors in parallel or series. For example, 2.5 kΩ is not in the E12 series; 3.3 kΩ || 10 kΩ = 2.481 kΩ (−0.75 %) or 1 kΩ + 1.5 kΩ = 2.5 kΩ. The standard value finder on this page does this for you.
How do I choose the power rating of parallel resistors?
Each resistor dissipates Pₖ = V² / Rₖ. Choose a rating of at least twice that value; the tool shows the recommended rating for each branch. For example, 1 kΩ at 12 V dissipates 144 mW, so a 0.5 W resistor is suitable.
Estun Automation
CODESYS
Crevis
Nexcom / Nexcobot
Leroy-Somer
Servo Systems
AC Drive + Motor
DC Drives
Smart PLC
Panel PC / IPC
Remote I/O