Slot 4 Menu 25 − Profinet Fault Values

Mode: Regeneration

These parameters define the fault values to sent to the mapped output parameters when a fault occurs.

This menu contains the parameters used to define the values to be sent to the mapped output destinations when fault values have been configured to be sent after a Profinet timeout event (see Profinet Timeout Action (4.24.010), Destination For Timeout Event (4.24.011) and Profinet Timeout Event Type (4.24.012)) has occurred.

Parameter	4.25.001 Output fault value 1
Short description	Sets the output fault value for mapping 1
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.002 Output fault value 2
Short description	Sets the output fault value for mapping 2
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.003 Output fault value 3
Short description	Sets the output fault value for mapping 3
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.004 Output fault value 4
Short description	Sets the output fault value for mapping 4
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.005 Output fault value 5
Short description	Sets the output fault value for mapping 5
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.006 Output fault value 6
Short description	Sets the output fault value for mapping 6
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.007 Output fault value 7
Short description	Sets the output fault value for mapping 7
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.008 Output fault value 8
Short description	Sets the output fault value for mapping 8
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.009 Output fault value 9
Short description	Sets the output fault value for mapping 9
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.010 Output fault value 10
Short description	Sets the output fault value for mapping 10
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.011 Output fault value 11
Short description	Sets the output fault value for mapping 11
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.012 Output fault value 12
Short description	Sets the output fault value for mapping 12
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.013 Output fault value 13
Short description	Sets the output fault value for mapping 13
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.014 Output fault value 14
Short description	Sets the output fault value for mapping 14
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.015 Output fault value 15
Short description	Sets the output fault value for mapping 15
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.016 Output fault value 16
Short description	Sets the output fault value for mapping 16
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.017 Output fault value 17
Short description	Sets the output fault value for mapping 17
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.018 Output fault value 18
Short description	Sets the output fault value for mapping 18
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.019 Output fault value 19
Short description	Sets the output fault value for mapping 19
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.020 Output fault value 20
Short description	Sets the output fault value for mapping 20
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.021 Output fault value 21
Short description	Sets the output fault value for mapping 21
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.022 Output fault value 22
Short description	Sets the output fault value for mapping 22
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.023 Output fault value 23
Short description	Sets the output fault value for mapping 23
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.024 Output fault value 24
Short description	Sets the output fault value for mapping 24
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.025 Output fault value 25
Short description	Sets the output fault value for mapping 25
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.026 Output fault value 26
Short description	Sets the output fault value for mapping 26
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.027 Output fault value 27
Short description	Sets the output fault value for mapping 27
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.028 Output fault value 28
Short description	Sets the output fault value for mapping 28
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.029 Output fault value 29
Short description	Sets the output fault value for mapping 29
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.030 Output fault value 30
Short description	Sets the output fault value for mapping 30
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.031 Output fault value 31
Short description	Sets the output fault value for mapping 31
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).

Parameter	4.25.032 Output fault value 32
Short description	Sets the output fault value for mapping 32
Minimum	-2147483648	Maximum	2147483647
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, PROFINET interface reset or PROFINET interface enable
Display Format	Standard	Decimal Places	0
Coding	RW, PT

This parameter defines the value to be sent to the mapped output destination when fault values have been configured to be sent (with Profinet Timeout Action (4.24.010)).