| Parameter | Range | Default | Type |
|---|
| 03.001 | Reactive Power | VM_POWER[MIN] to VM_POWER[MAX] kVAr | RO | Num | ND | NC | PT | FI |
| 03.004 | Regen Synchronisation Mode | Re‑synchronise (0), Delayed Trip (1), Trip (2), Auto‑synchronise (3) | Re‑synchronise (0) | RW | Txt | | | | US |
| 03.005 | Voltage Set Point | VM_DC_VOLTAGE_SET[MIN] to VM_DC_VOLTAGE_SET[MAX] V | 200V drive: 350 V
400V drive: 700 V
575V drive: 835 V
690V drive: 1100 V
| RW | Num | | RA | | US |
| 03.006 | Voltage Controller Proportional Gain Kp | 0 to 65535 | 4000 | RW | Num | | | | US |
| 03.007 | Disable Charge System / Close Contactor | Off (0) or On (1) | RO | Bit | ND | NC | PT | |
| 03.008 | Charge System Disabled / Contactor Closed | Off (0) or On (1) | RO | Bit | ND | NC | | |
| 03.009 | Synchronised | Off (0) or On (1) | RO | Bit | ND | NC | PT | |
| 03.010 | Power Input 1 | ±100.0 % | 0.0 % | RW | Num | | NC | | |
| 03.011 | Current Trim Mode | 0 to 1 | 0 | RW | Num | | | | US |
| 03.012 | Power Input Mode | Off (0) or On (1) | Off (0) | RW | Bit | | | | US |
| 03.013 | Power Input 2 | ±100.0 % | 0.0 % | RW | Num | | NC | | |
| 03.014 | Power Input 3 | ±100.0 % | 0.0 % | RW | Num | | NC | | |
| 03.015 | Power Input 1 Scaling | 0.000 to 4.000 | 1.000 | RW | Num | | | | US |
| 03.016 | Power Input 2 Scaling | 0.000 to 4.000 | 1.000 | RW | Num | | | | US |
| 03.017 | Power Input 3 Scaling | 0.000 to 4.000 | 1.000 | RW | Num | | | | US |
| 03.018 | Power Input kW | VM_POWER[MIN] to VM_POWER[MAX] kW | 0.000 kW | RW | Num | | NC | | |
| 03.019 | Reactive Power Input Mode | Off (0) or On (1) | Off (0) | RW | Bit | | | | US |
| 03.020 | Reactive Power Input kVAR | VM_POWER[MIN] to VM_POWER[MAX] kVAr | 0.000 kVAr | RW | Num | | NC | | US |
| 03.021 | Harmonic Reduction Enable | Disabled (0), Imbalance Only (1), All (2) | Imbalance Only (1) | RW | Txt | | | | US |
| 03.022 | Voltage Ramp Time | 0.1 to 100.0 V/ms | 1.0 V/ms | RW | Num | | | | US |
| 03.023 | Regen Supply Loss a.c. Level | VM_AC_VOLTAGE_SET[MIN] to VM_AC_VOLTAGE_SET[MAX] V | 200V drive: 75 V
400V drive: 150 V
575V drive: 225 V
690V drive: 225 V
| RW | Num | | RA | | US |
| 03.024 | Regen Minimum Frequency | 10 to 200 Hz | 40 Hz | RW | Num | | | | US |
| 03.025 | Regen Maximum Frequency | 10 to 200 Hz | 70 Hz | RW | Num | | | | US |
| 03.026 | Regen Minimum Voltage | VM_AC_VOLTAGE[MIN] to VM_AC_VOLTAGE[MAX] V | 0 V | RW | Num | | RA | | US |
| 03.027 | Regen Maximum Voltage | VM_AC_VOLTAGE[MIN] to VM_AC_VOLTAGE[MAX] V | 0 V | RW | Num | | RA | | US |
| 03.028 | Supply Voltage | VM_AC_VOLTAGE_SET[MIN] to VM_AC_VOLTAGE_SET[MAX] V | 200V drive: 230 V
400V drive 50Hz: 400 V
400V drive 60Hz: 460 V
575V drive: 575 V
690V drive: 690 V
| RW | Num | | RA | | US |
| 03.029 | Supply Voltage Detection Mode | Measured (0), User (1), User Delayed (2) | User Delayed (2) | RW | Txt | | | | US |
| 03.030 | Island Detection Enable | Off (0) or On (1) | Off (0) | RW | Bit | | | | US |
| 03.031 | Island Detection Injection Frequency | 1Hz (0), 2Hz (1), 4Hz (2) | 1Hz (0) | RW | Txt | | | | US |
| 03.032 | Island Detection Level | 0 to 100 % | RO | Num | ND | NC | PT | |
| 03.033 | Island Detection Synchronisation Source Select | Disabled (0), Slot 1 (1), Slot 2 (2), Slot 3 (3), Slot 4 (4) | Disabled (0) | RW | Txt | | | | US |
| 03.034 | Island Detect Synchronisation Source | Disabled (0), Slot 1 (1), Slot 2 (2), Slot 3 (3), Slot 4 (4) | RO | Txt | ND | NC | PT | |
| 03.035 | Synchronisation Headroom | 0.0 to 25.0 % | 5.0 % | RW | Num | | | | US |
| 03.036 | Estimated Supply Voltage | VM_AC_VOLTAGE[MIN] to VM_AC_VOLTAGE[MAX] V | RO | Num | ND | NC | PT | |
| 03.037 | Positive Phase Sequence Volts | VM_AC_VOLTAGE[MIN] to VM_AC_VOLTAGE[MAX] V | RO | Num | ND | NC | PT | FI |
| 03.038 | Negative Phase Sequence Volts | VM_AC_VOLTAGE[MIN] to VM_AC_VOLTAGE[MAX] V | RO | Num | ND | NC | PT | FI |
| 03.039 | Negative Phase Sequence Current Gain | 0.00 to 1.00 | 0.05 | RW | Num | | | | US |