Slot 4 Menu 22 − EtherNet/IP Out Mappings

Mode: RFC‑S

This menu contains the parameters used to define the destination parameters for data that will be received from the PLC

Parameter	4.22.001 Output mapping parameter 1
Short description	Sets output mapping parameter 1
Minimum	0	Maximum	499999
Default	6042	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.002 Output mapping parameter 2
Short description	Sets output mapping parameter 2
Minimum	0	Maximum	499999
Default	1021	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.003 Output mapping parameter 3
Short description	Sets output mapping parameter 3
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.004 Output mapping parameter 4
Short description	Sets output mapping parameter 4
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.005 Output mapping parameter 5
Short description	Sets output mapping parameter 5
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.006 Output mapping parameter 6
Short description	Sets output mapping parameter 6
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.007 Output mapping parameter 7
Short description	Sets output mapping parameter 7
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.008 Output mapping parameter 8
Short description	Sets output mapping parameter 8
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.009 Output mapping parameter 9
Short description	Sets output mapping parameter 9
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.010 Output mapping parameter 10
Short description	Sets output mapping parameter 10
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.011 Output mapping parameter 11
Short description	Sets output mapping parameter 11
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.012 Output mapping parameter 12
Short description	Sets output mapping parameter 12
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.013 Output mapping parameter 13
Short description	Sets output mapping parameter 13
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.014 Output mapping parameter 14
Short description	Sets output mapping parameter 14
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.015 Output mapping parameter 15
Short description	Sets output mapping parameter 15
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.016 Output mapping parameter 16
Short description	Sets output mapping parameter 16
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.017 Output mapping parameter 17
Short description	Sets output mapping parameter 17
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.018 Output mapping parameter 18
Short description	Sets output mapping parameter 18
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.019 Output mapping parameter 19
Short description	Sets output mapping parameter 19
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.020 Output mapping parameter 20
Short description	Sets output mapping parameter 20
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.021 Output mapping parameter 21
Short description	Sets output mapping parameter 21
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.022 Output mapping parameter 22
Short description	Sets output mapping parameter 22
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.023 Output mapping parameter 23
Short description	Sets output mapping parameter 23
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.024 Output mapping parameter 24
Short description	Sets output mapping parameter 24
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.025 Output mapping parameter 25
Short description	Sets output mapping parameter 25
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.026 Output mapping parameter 26
Short description	Sets output mapping parameter 26
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.027 Output mapping parameter 27
Short description	Sets output mapping parameter 27
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.028 Output mapping parameter 28
Short description	Sets output mapping parameter 28
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.029 Output mapping parameter 29
Short description	Sets output mapping parameter 29
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.030 Output mapping parameter 30
Short description	Sets output mapping parameter 30
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.031 Output mapping parameter 31
Short description	Sets output mapping parameter 31
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.

Parameter	4.22.032 Output mapping parameter 32
Short description	Sets output mapping parameter 32
Minimum	0	Maximum	499999
Default	0	Units
Type	32 Bit User Save	Update Rate	Module reset, EtherNet/IP interface reset or EtherNet/IP interface enable
Display Format	Slot Menu Parameter	Decimal Places	0
Coding	RW, PT, BU

This parameter defines a destination parameter for the data that will be received from the PLC.